Description
Opposite Lock Cardiff is a suspension specialist and authorised dealer for Australia’s leading suspension brands in Newcastle, NSW. We stock and fit Next Gen Ford Ranger Raptor lift kits from Tough Dog, Dobinsons, Raw 4×4, Fulcrum and Outback Armour at our Cardiff workshop on Munibung Road. Call us on (02) 4058 1911 or visit us Monday to Friday 8am to 5pm and Saturday 9am to 1pm.
Why Factory Raptor Suspension Holds Back What the Platform Can Actually Do
The Next Gen Ford Ranger Raptor lift kit is one of the first modifications Newcastle Raptor owners make after taking delivery. The factory Raptor suspension is impressive for a standard dual cab ute but it does not deliver everything the Raptor platform is capable of. The factory setup sits nose-down from the factory, runs limited wheel travel for genuine off-road use and leaves minimal tyre clearance for anything beyond the stock 285/70R17 tyre.
A correctly fitted 2 inch or 3 inch lift from a quality Australian brand corrects the nose-down factory rake, adds meaningful clearance for larger tyres and improves suspension geometry for the kind of driving the Raptor is designed for. Our technicians at our Cardiff workshop in Newcastle fit Ranger Raptor lift kits to the 2022 to 2026 Next Gen platform regularly and understand exactly what the factory setup needs to perform correctly.
Next Gen Ranger Raptor Lift Kit Vehicle Compatibility
Vehicle | Generation | Year Range | Compatible |
Ford Ranger Raptor | Next Gen MY22 | 2022 to 2026 | Yes |
Ford Ranger Raptor | Previous Gen PX3 | 2018 to 2021 | Contact us to confirm |
Contact our team at our Cardiff workshop in Newcastle before purchasing if you are unsure which generation your Ranger Raptor is and we confirm the correct kit before you commit.
Understanding the Raptor's Fox Suspension Before You Lift
This is the most important section on this page for any Raptor owner considering a lift kit. The Next Gen Raptor does not run standard struts like the base Next Gen Ranger. It runs factory Fox coilover suspension at the front and Fox rear shocks at the rear. This changes everything about how a lift kit is selected and fitted.
Why the Fox Suspension Matters for Lift Selection
A standard lift kit designed for the base Next Gen Ranger uses spring spacers or replacement springs that sit over conventional struts. These do not suit the Raptor’s Fox coilover setup without specific engineering consideration.
A lift kit designed specifically for the Next Gen Raptor works with the Fox coilovers rather than ignoring them. The correct approach uses strut spacers or coil spring upgrades that are engineered around the Fox damper dimensions and valving. This retains the Fox suspension’s performance characteristics while adding the lift height.
Fitting a non-Raptor-specific lift kit to the Next Gen Raptor can alter the Fox shock’s operating range, affect ride quality and in some cases cause premature wear on the Fox components. Our team at our Cardiff workshop confirms the correct Raptor-specific kit for your setup before fitting starts.
Front to Rear Lift Ratio
The Next Gen Raptor runs a naturally nose-down factory stance from the factory. A correct lift kit addresses the front and rear heights independently to achieve the right rake for the lifted platform. Most quality Raptor lift kits use a front lift that is equal to or slightly greater than the rear lift to correct the factory nose-down attitude while maintaining correct braking geometry and weight transfer under load. Our staff at our Cardiff workshop in Newcastle measure the front and rear heights before and after installation and confirm the correct rake before the vehicle leaves.
2 Inch and 3 Inch Lift Options for the Next Gen Ranger Raptor
We stock both 2 inch and 3 inch lift options for the Next Gen Ranger Raptor at our Cardiff workshop in Newcastle. The right option depends on your intended tyre size, your primary use and whether you want to retain standard compliance with NSW modification regulations.
2 Inch Lift Option
A 2 inch lift on the Next Gen Raptor delivers approximately 50mm of additional clearance from the factory height. This is the most popular lift height among Newcastle Raptor owners who use their vehicle daily and off-road on weekends.
A 2 inch lift creates sufficient clearance for tyre sizes up to approximately 285/75R17 or 295/70R17 depending on the specific tyre and rim combination. It corrects the factory nose-down stance and improves approach and departure angles without moving outside standard NSW modification thresholds.
The 2 inch lift suits daily drivers, weekend tourers and Raptor owners who want improved ground clearance and tyre space without a dramatic visual transformation.
3 Inch Lift Option
A 3 inch lift on the Next Gen Raptor delivers approximately 75mm of additional clearance and is the right choice for owners who want to run 35 inch tyres and use the Raptor on more serious off-road terrain through the Hunter Valley and beyond.
A 3 inch lift requires Upper Control Arms on most Raptor builds to correct the front suspension geometry. Without UCAs a 3 inch lift can cause negative camber, accelerated tyre wear and affect the Fox suspension’s operating characteristics at the extremes of travel. Our technicians at our Cardiff workshop confirm whether UCAs are required for your specific 3 inch lift selection and include them in the quote where needed.
The 3 inch lift suits serious tourers, off-road builds and Raptor owners who want maximum clearance and the ability to run larger tyres.
The Suspension Brands We Fit to Next Gen Raptors in Newcastle
We stock lift kits for the Next Gen Ranger Raptor from Australia’s leading suspension brands at our Cardiff workshop in Newcastle. Every brand we stock is available in Raptor-specific configurations engineered for the Fox suspension platform.
- Tough Dog: Australian designed and manufactured. Tough Dog Raptor lift kits are calibrated for the Fox coilover front suspension and offer a controlled lift with minimal impact on factory ride characteristics.
- Dobinsons: Queensland born suspension brand with over 60 years of Australian manufacturing experience. Dobinsons Raptor kits are a popular choice among Newcastle Raptor owners who tour and use their vehicles heavily.
- Raw 4×4: An Australian brand that designs specifically for the Australian market. Raw 4×4 Raptor kits are designed to work within the Fox suspension operating range without altering the damper’s valved performance.
- Fulcrum Suspensions: Fulcrum designs suspension systems tested extensively in Australian conditions. Their Raptor-specific kits deliver lift with a focus on maintaining correct suspension geometry through the full range of travel.
- Outback Armour: Australian performance suspension brand. Outback Armour’s Raptor configurations suit owners who use their Raptor in demanding off-road conditions regularly.
Our team at our Cardiff workshop helps you select the right brand and configuration for your specific Raptor, your intended use and your budget before you commit to a purchase.
What the Next Gen Raptor Lift Kit Installation Covers
Getting your Next Gen Ranger Raptor lift kit fitted correctly at our Cardiff workshop means the lift height is accurate, the suspension geometry is correct and the Fox suspension operates within its designed parameters before your vehicle leaves.
Here is exactly what our Raptor lift kit installation covers.
- Full vehicle inspection before work starts to identify any pre-existing suspension wear or damage.
- Measurement of front and rear heights before installation to confirm the correct kit configuration.
- Removal of factory suspension components and fitting of the lift kit to the Raptor-specific mounting points.
- Upper Control Arm fitting where required for 3 inch lifts or specific build configurations.
- Front and rear height measurement after installation to confirm correct lift height and rake.
- Four-wheel alignment to correct camber, caster and toe after the lift.
- Road test to confirm correct handling, steering and suspension behaviour before handover.
- Confirmation that the installation meets NSW modification regulations for the lift height fitted.
Most Next Gen Ranger Raptor lift kit installations complete within a single workshop day at our Cardiff workshop. We confirm the exact timeframe when you book based on the kit selected and whether UCAs or additional components are required.
NSW Lift Laws and Compliance
All lift kit installations at our Cardiff workshop comply with NSW modification regulations. Under NSW vehicle modification standards a lift of up to 75mm (3 inches) is achievable within standard modification thresholds when fitted correctly with the appropriate components.
Our staff confirm the compliance requirements for your specific lift height before work starts. We do not fit lift kits that exceed legal modification limits without advising you of the engineering certification process required for larger lifts in NSW.
If you are unsure about compliance for your intended lift height call us on (02) 4058 1911 before purchasing and our team clarifies the requirements for your specific Raptor build.
Why Get Your Ranger Raptor Lift Kit Fitted at Opposite Lock Cardiff
We Know the Next Gen Raptor Platform
Our staff fit lift kits to Next Gen Ford Ranger Raptors at our Cardiff workshop in Newcastle regularly. We understand the Fox suspension setup, know how each lift height affects the suspension geometry and confirm the correct kit and configuration before fitting starts. When you bring your Raptor to our Cardiff workshop you work with technicians who have lifted this exact platform before.
Multiple Brands Available in One Workshop
We stock Raptor-specific lift kits from Tough Dog, Dobinsons, Raw 4×4, Fulcrum and Outback Armour at our Cardiff workshop. You compare brands, lift heights and price points in person with our team rather than choosing blindly from an online listing. Our technicians give you straight advice on which brand and configuration suits your specific Raptor, your use and your budget.
Full Alignment and Road Test Included
Every Raptor lift kit installation at our Cardiff workshop includes a 4 wheel alignment and a road test before handover. Fitting a lift kit without a four-wheel alignment after installation leaves your Raptor with incorrect geometry that accelerates tyre wear and affects handling. We include the alignment as part of the installation process not as an additional charge.
Transparent Pricing With Every Cost Confirmed Upfront
We give you a clear itemised price covering the lift kit, any additional components required such as UCAs and the full installation before we start any work. Every cost is agreed before we start and nothing changes between the quote and the invoice.
NSW Compliance Confirmed on Every Installation
Every lift kit we fit complies with NSW modification regulations for the lift height selected. We confirm the compliance requirements before fitting starts and advise you of any additional requirements for your specific lift configuration.
Over 10 Years Serving Newcastle 4WD Owners
We have been supplying and fitting 4WD suspension to drivers across the Newcastle region for over ten years. Our customers from Newcastle, Maitland, Hunter Valley, Central Coast, Port Stephens and Nelson Bay return to us because we stock genuine brands, give straight advice and fit everything correctly at our Cardiff workshop. Read our Google reviews before booking to see what Newcastle and Hunter Valley Raptor owners say about their experience at our workshop.
Buy Your Next Gen Ranger Raptor Lift Kit in Newcastle
We stock 2 inch and 3 inch lift options for the Next Gen Ford Ranger Raptor from Tough Dog, Dobinsons, Raw 4×4, Fulcrum and Outback Armour at our Cardiff workshop in Newcastle. We give you a clear itemised price upfront covering the kit, any additional components and the full installation with every cost confirmed before we start. Call us on (02) 4058 1911 or get a free quote online today. We are open Monday to Friday 8am to 5pm and Saturday 9am to 1pm.
Next Gen Ranger Raptor Lift Kit Newcastle FAQs
What lift kit suits the Next Gen Ford Ranger Raptor?
The Next Gen Ford Ranger Raptor requires a lift kit specifically engineered for the Fox coilover front suspension and Fox rear shock setup. Standard Next Gen Ranger lift kits designed for conventional struts do not suit the Raptor without specific engineering consideration. We stock Raptor-specific 2 inch and 3 inch lift kits from Tough Dog, Dobinsons, Raw 4×4, Fulcrum and Outback Armour at our Cardiff workshop in Newcastle. Call us on (02) 4058 1911 and our team confirms the correct kit for your specific Raptor build before you commit to anything.
What is the difference between a 2 inch and 3 inch lift on the Next Gen Raptor?
A 2 inch lift adds approximately 50mm of clearance, corrects the factory nose-down rake and creates space for tyre sizes up to approximately 285/75R17 or 295/70R17. It suits daily drivers and weekend tourers who want improved clearance without moving significantly outside standard NSW modification thresholds. A 3 inch lift adds approximately 75mm of clearance and suits owners who want to run 35 inch tyres and use the Raptor on more demanding terrain. A 3 inch lift typically requires Upper Control Arms to correct suspension geometry. Our team at our Cardiff workshop confirms which option suits your specific build and intended use before you purchase.
Does a lift kit affect the Fox suspension on the Next Gen Raptor?
A correctly selected and fitted Raptor-specific lift kit works with the Fox suspension system rather than compromising it. The lift kits we stock are engineered to work within the Fox coilover’s operating range at the front and the Fox shock’s operating range at the rear. A poorly selected kit or a non-Raptor-specific kit fitted to the Raptor can affect the Fox shock’s operating characteristics and in some cases cause premature wear. Our technicians at our Cardiff workshop confirm the correct Raptor-specific kit for your setup before fitting starts.
Does the lift kit suit the 2023 Ranger Raptor?
Yes. The lift kits we stock for the Next Gen Ranger Raptor suit the 2022 to 2026 Raptor platform including the 2023 model year. All Next Gen Raptors from MY22 onwards run the same Fox suspension architecture and the same platform dimensions. If you have a 2023 Ranger Raptor and want a 2 inch or 3 inch lift kit, call us on (02) 4058 1911 or get a free quote online and our team confirms the correct kit for your specific vehicle.
How long does a Raptor lift kit installation take at your Newcastle workshop?
Most Next Gen Ranger Raptor lift kit installations complete within a single workshop day at our Cardiff workshop in Newcastle. The exact timeframe depends on the lift kit selected, whether Upper Control Arms are required and the current workshop schedule. We confirm the exact timeframe when you book. Call us on (02) 4058 1911 to book your Raptor lift kit installation today.
Is a lift kit legal on the Next Gen Ranger Raptor in NSW?
Yes. Lift kits up to 75mm which is approximately 3 inches are achievable within standard NSW modification thresholds when fitted correctly with the appropriate components. Every lift kit we fit at our Cardiff workshop in Newcastle complies with NSW modification regulations for the lift height selected. We confirm the compliance requirements for your specific lift height before fitting starts and advise you of any additional requirements where applicable.
Can you fit a Ranger Raptor lift kit at your Newcastle workshop?
Yes. Our technicians fit Next Gen Ford Ranger Raptor lift kits at our Cardiff workshop in Newcastle. We stock 2 inch and 3 inch options from Tough Dog, Dobinsons, Raw 4×4, Fulcrum and Outback Armour. Every installation includes a full alignment and road test before handover. Call us on (02) 4058 1911 or get a free quote online to book your Raptor lift kit installation today.
Liam T –
Got my Next Gen Ranger Raptor suspension lift done at Opposite Lock Cardiff and the difference is unreal. The car feels more capable off-road and still smooth to drive every day. The team was easy to deal with, explained everything clearly, and did a great job. Highly recommend.