Tradesman 4x4 Canopies
We stock and fit Tradesman 4×4 aluminium canopies at our Cardiff workshop in Newcastle, NSW. As a licensed and authorised Tradesman 4×4 dealer and installer in Newcastle, we supply the complete D1 Solid and D1 Vision aluminium canopy range. Both series suit popular dual cab utes across work, touring and everyday use. Call us on (02) 4058 1911 to confirm the correct Tradesman canopy for your specific vehicle and tub configuration.
Tradesman D1 Solid and D1 Vision Canopies
We stock two series of Tradesman 4×4 aluminium canopies. Both share the same core specifications and dimensions. The difference is the panel design.
D1 Solid Aluminium Canopy
The Tradesman D1 Solid canopy uses solid aluminium panels throughout with no windows in the side doors. This suits owners who want maximum privacy and security for tools, equipment and cargo. The solid panel design also gives the canopy a cleaner, flush appearance across the tub.
D1 Solid Aluminium Canopy
For Volkswagen Amarok
D1 Solid Aluminium Canopy
For JAC T9
D1 Solid Aluminium Canopy
For BYD Shark 6
D1 Solid Aluminium Canopy
For LDV Terron 9
D1 Solid Aluminium Canopy
For Jeep Gladiator
D1 Solid Aluminium Canopy
For MG U9
D1 Solid Aluminium Canopy
For Kia Tasman
D1 Solid Aluminium Canopy
For Foton Tunland V7 & V9
D1 Solid Aluminium Canopy
For LDV T60 (Standard Tub)
D1 Solid Aluminium Canopy
For Toyota Hilux N90 2026
D1 Solid Aluminium Canopy
For Mazda BT-50
D1 Solid Aluminium Canopy
.
For Toyota Hilux 2026 (N9
D1 Solid Aluminium Canopy
For Ford Ranger
D1 Solid Aluminium Canopy
For Mitsubishi Triton
D1 Solid Aluminium Canopy
For Ford Ranger PX2
D1 Solid Aluminium Canopy
For Nissan Navara
D1 Solid Aluminium Canopy
For GWM Cannon
D1 Solid Aluminium Canopy
For GWM Cannon Alpha
D1 Solid Aluminium Canopy
For Toyota Hilux
D1 Solid Aluminium Canopy For Holden Colorado
D1 Solid Aluminium Canopy
For Isuzu D-Max
D1 Solid Aluminium Canopy
For Nissan Navara - Extra Cab
D1 Solid Aluminium Canopy
For Chevrolet Silverado (SWB)
D1 Solid Aluminium Canopy
For Toyota Hilux - Extra Cab
D1 Solid Aluminium Canopy
For Ford F-150 (SWB)
D1 Solid Aluminium Canopy
For Ford Ranger - Extra Cab
D1 Solid Aluminium Canopy
For Ford Ranger PX1, PX2, PX3 - Extra Cab
D1 Solid Aluminium Canopy
For Isuzu D-Max - Extra Cab
D1 Solid Aluminium Canopy
For RAM 1500 (SWB)
D1 Solid Aluminium Canopy
For LDV T60 (Mega Tub)
D1 Solid Aluminium Canopy
For Mazda BT-50 - Extra Cab
D1 Solid Aluminium Canopy
For Toyota Tundra (SWB)
D1 Solid Aluminium Canopy
For Mitsubishi Triton - Extra Cab
D1 Solid Aluminium Canopy
For RAM 1500 (LWB)
D1 Solid Aluminium Canopy
For Chevrolet Silverado (LWB)
D1 Solid Aluminium Canopy
For Toyota Tundra (LWB)
D1 Solid Aluminium Canopy
For Ford F-150 (LWB)
D1 Vision Aluminium Canopy
The D1 Vision canopy uses aluminium panels with integrated glass windows in the front panel and rear door. The windows give you visibility into the tub without opening any doors, which suits owners who regularly check their load or need to locate specific items quickly.
D1 Vision Aluminium Canopy
For Volkswagen Amarok
D1 Vision Aluminium Canopy
For JAC T9
D1 Vision Aluminium Canopy For BYD Shark 6
D1 Vision Aluminium Canopy
For LDV Terron
D1 Vision Aluminium Canopy
For Jeep Gladiator
D1 Vision Aluminium Canopy
For MG U9
D1 Vision Aluminium Canopy
For Kia Tasman
D1 Vision Aluminium Canopy
For Foton Tunland V7 & V9
D1 Vision Aluminium Canopy
For LDV T60 (Standard Tub)
D1 Vision Aluminium Canopy
For Toyota Hilux N90 2026
D1 Vision Aluminium Canopy
For Mazda BT-50
D1 Vision Aluminium Canopy
For Toyota Hilux 2026 (N90)
D1 Vision Aluminium Canopy
For Ford Ranger
D1 Vision Aluminium Canopy
For Mitsubishi Triton
D1 Vision Aluminium Canopy
For Ford Ranger PX1, PX2, PX3
D1 Vision Aluminium Canopy
For Nissan Navara
D1 Vision Aluminium Canopy
For GWM Cannon
D1 Vision Aluminium Canopy
For GWM Cannon Alpha
D1 Vision Aluminium Canopy
For Toyota Hilux
D1 Vision Aluminium Canopy
For Holden Colorado
D1 Vision Aluminium Canopy
For Isuzu D-Max
D1 Vision Aluminium Canopy
For Extra Cab Nissan Navara
D1 Vision Aluminium Canopy
For Chevrolet Silverado (SWB)
D1 Vision Aluminium Canopy
For Toyota Hilux - Extra Cab
D1 Vision Aluminium Canopy
For Ford F-150 (SWB)
D1 Vision Aluminium Canopy
For Ford Ranger - Extra Cab
D1 Vision Aluminium Canopy
For Ford Ranger PX1, PX2, PX3 - Extra Cab
D1 Vision Aluminium Canopy
For Isuzu D-Max - Extra Cab
D1 Vision Aluminium Canopy
For RAM 1500 (SWB)
D1 Vision Aluminium Canopy
For LDV T60 (Mega Tub)
D1 Vision Aluminium Canopy
For Mazda BT-50 - Extra Cab
D1 Vision Aluminium Canopy
For Toyota Tundra (SWB)
D1 Vision Aluminium Canopy
For Mitsubishi Triton - Extra Cab
D1 Vision Aluminium Canopy
For RAM 1500 (LWB)
D1 Vision Aluminium Canopy
For Chevrolet Silverado (LWB)
D1 Vision Aluminium Canopy
For Toyota Tundra (LWB)
D1 Vision Aluminium Canopy
For Ford F-150 (LWB)
What Makes the Tradesman D1 Canopy Different
Both the D1 Solid and D1 Vision canopies share the same core construction and load ratings. Every Tradesman D1 canopy uses high-grade aluminium with panels between 2mm and 3mm thick, giving a strong structure without adding excessive weight to the tub. At around 65kg, the D1 canopy sits at the lighter end of the aluminium canopy market. This keeps the combined tub and canopy weight manageable for owners who are conscious of payload limits, particularly on vehicles that have received a GVM upgrade. The roof carries a 300kg static load rating and a 125kg dynamic load rating. This suits owners who want to run a rooftop tent, roof rack, ladders or work equipment on top of the canopy without exceeding the structure’s rating.
Tradesman D1 Canopy Specifications
Specification | Detail |
Weight | Approximately 65kg |
Panel thickness | 2mm to 3mm aluminium |
Finish | Powder-coated black |
Access doors | Two lift-up side doors and one rear door |
Side door feature | Built-in sliders on D1 Vision, solid panels on D1 Solid |
Front panel | Glass window on D1 Vision, solid on D1 Solid |
Rear door | Glass window on both D1 Solid and D1 Vision |
Interior lighting | Included |
Canopy vent | Included |
Third brake light | Included |
Twin reverse lights | Included |
Roof mounting rails | Included, suits roof racks |
Static roof load | 300kg |
Dynamic roof load | 125kg |
Installation | Clamp-on, no drilling required |
Waterproofing | Silicone application to all joints recommended after fitting |
Call (02) 4058 1911 to confirm full specifications for your specific vehicle and tub configuration before ordering.
Clamp-On Installation
Every Tradesman D1 canopy uses a clamp-on mounting system. Our technicians secure the canopy to your tub using the supplied fitting kit and clamps without drilling into the tub structure. This keeps your ute’s tub in original condition and allows the canopy to be removed later if needed. After fitting, we apply silicone to every joint as standard. This gives the canopy its best waterproofing performance in heavy rain and keeps dust out during off-road driving and outback travel.
Choosing Between D1 Solid and D1 Vision
The right series depends on how you use your ute. The D1 Solid suits tradies, commercial operators and owners who carry tools and equipment that do not need to be seen from outside the canopy. The solid panels give maximum privacy and a cleaner side profile. The D1 Vision suits touring owners, families and owners who load and unload regularly. The windows let you see what is inside without opening a door, which matters when you are looking for a specific item in a packed tub at a campsite or job site. Both series carry the same load ratings, weight and construction standards. Call us on (02) 4058 1911 and our team confirms which series suits your specific use before any order goes in.
Vehicle Compatibility
We stock Tradesman 4×4 aluminium ute canopies for the following confirmed platforms. Call (02) 4058 1911 to confirm the correct series and configuration for your specific vehicle and tub.
Make | Model |
Toyota | HiLux |
Toyota | HiLux N90 2026 |
Toyota | Tundra |
Ford | Ranger PX1, PX2 and PX3 |
Ford | Ranger Next Gen |
Ford | F-150 |
Isuzu | D-Max |
Mazda | BT-50 |
Mitsubishi | Triton |
Nissan | Navara |
Volkswagen | Amarok |
Holden | Colorado |
GWM | Cannon |
GWM | Cannon Alpha |
LDV | T60 Standard Tub |
LDV | T60 Mega Tub |
LDV | Terron |
BYD | Shark 6 |
Kia | Tasman |
MG | U9 |
Jeep | Gladiator |
JAC | T9 |
Foton | Tunland V7 and V9 |
RAM | 1500 SWB and LWB |
Chevrolet | Silverado SWB and LWB |
Extra cab configurations also available for Toyota HiLux, Ford Ranger, Isuzu D-Max, Nissan Navara, Mazda BT-50 and Mitsubishi Triton.
Tradesman 4x4 Canopy Installation in Newcastle
We install every Tradesman D1 canopy at our Cardiff workshop on Munibung Road. Our technicians confirm correct fitment for your specific vehicle and tub, mount the canopy using the clamp-on system, apply silicone to all joints and check every door, lock and light function before your vehicle leaves our workshop. Installation covers D1 Solid and D1 Vision canopies across dual cab and extra cab configurations. We provide a fixed quote covering the canopy and installation before any work starts. For other ute canopy options, check our Carryboy Canopies.
Buy Tradesman 4x4 Canopy in Newcastle
Call us on (02) 4058 1911 to confirm current stock across the Tradesman D1 canopy range and get a fixed quote covering your canopy and installation at our Cardiff workshop.Newcastle and Hunter Valley ute owners have trusted our Cardiff workshop for aluminium ute canopies and 4WD accessories for over ten years. Read our Google reviews from real local customers before booking. We serve ute and 4WD owners from Newcastle, Cardiff, Maitland, Cessnock, Hunter Valley, Lake Macquarie, Central Coast, Port Stephens and Nelson Bay. Get a free quote online or call us Monday to Friday 8am to 5pm and Saturday 9am to 1pm.
FREQUENTLY ASKED QUESTIONS
Where can I buy a Tradesman 4x4 canopy in Newcastle?
Opposite Lock Cardiff on Munibung Road in Cardiff, Newcastle is the licensed and authorised Tradesman 4×4 canopy dealer and installer in Newcastle. We stock the complete D1 Solid and D1 Vision aluminium canopy range and install every canopy at our Cardiff workshop. Call us on (02) 4058 1911 to confirm current stock for your specific vehicle. We are open Monday to Friday 8am to 5pm and Saturday 9am to 1pm.
What is the difference between the Tradesman D1 Solid and D1 Vision canopy?
The D1 Solid uses solid aluminium panels throughout with no windows in the side doors, suiting owners who want maximum privacy and security. The D1 Vision uses aluminium panels with glass windows in the front panel and rear door, giving you visibility into the tub without opening a door. Both series share the same weight, load ratings, clamp-on installation and powder-coated black finish. Call us on (02) 4058 1911 to confirm which series suits your specific use before ordering.
What is the roof load rating on the Tradesman D1 aluminium canopy?
The Tradesman D1 canopy carries a 300kg static roof load rating and a 125kg dynamic roof load rating. This suits owners who want to run a rooftop tent, roof rack, ladders or work equipment on top of the canopy. Call us on (02) 4058 1911 to confirm the correct roof rack setup for your specific canopy and vehicle before purchasing.
Does the Tradesman D1 canopy require drilling into the tub?
No. Every Tradesman D1 canopy uses a clamp-on installation system. Our technicians secure the canopy to your tub using the supplied fitting kit and clamps without drilling into the tub structure. This keeps your ute’s tub in original condition and allows the canopy to be removed later if needed. Call us on (02) 4058 1911 to confirm installation details for your specific vehicle and tub configuration.
How long does Tradesman canopy installation take in Newcastle?
Tradesman D1 canopy installation at our Cardiff workshop typically takes two to three hours depending on the vehicle and configuration. Our technicians mount the canopy, apply silicone to all joints and check every door, lock and light before handing your vehicle back. Call us on (02) 4058 1911 to book and get a fixed quote before work starts.
- Tradesman 4×4 Authorised Distributor in Newcastle
