Description
Ford Ranger Next Gen Bullbar (No Loop)
The Raxar next gen ranger bullbar replaces the factory front bumper with a full bumper replacement design built for the RA Series Ford Ranger. It suits XL, XLS, Sport, Wildtrak, Wildtrak X and Platinum grades and also suits the Ford Next Gen Everest. Opposite Lock Cardiff is a licensed and authorised Raxar dealer and installer in Newcastle.
We stock and fit Raxar ford ranger next gen no loop bullbar at our 4WD workshop in Cardiff, NSW.
No Loop Bull Bar vs Loop Bull Bar: Which Bull Bar Suits Your Next Gen Ranger
Bull bars for next gen ranger owners come in two main styles. Understanding the difference helps you choose the right product before purchasing.
- A loop bullbar has a vertical tube rising above the main horizontal bar. The loop adds upper front protection and provides additional mounting points for aerials and spotlights at height. The traditional loop style suits heavily modified off-road and outback builds.
- The no loop bull bar ford ranger owners choose has no vertical tube above the main bar. The ford ranger no loop bull bar from Raxar gives the Next Gen Ranger a clean lower-profile front appearance that sits closer to the factory styling. The next gen ranger bull bar in no loop style still delivers full bumper replacement protection, 4 tonne rated recovery points, full winch compatibility and underbody bash plates. The no loop style removes the loop tube above the bar entirely.
If you need help choosing between styles contact our team on (02) 4058 1911 and we help you decide.
Key Features - Raxar No Loop Bullbar Ford Next Gen Ranger
The ford ranger next gen bull bar (No Loop) from Raxar includes the following confirmed features.
- ADR compliant: meets Australian safety standards for road use
- Bumper replacement design: completely replaces the factory front bumper
- Underbody bash plates: protects under the front of the vehicle
- 4-tonne rated recovery points: rated for vehicle recovery in the field
- Full winch compatibility: suits a wide range of popular winch models
- Fog lights included for applicable models
- High lift jacking points: built in for field recovery
- Split pan design: increases structural strength and maintains airflow
- Inner wing braces: adds strength to the inner wing mounting area
- E-coated and powder coated matte black: corrosion resistant inside and outside
- Factory parking sensor compatible where applicable
- Compatible with tech pack safety features
- 2 antenna tabs for UHF and communication gear
- Driving light mounting provisions
- Designed and built in Australia
Technical Specifications
Specification | Detail | Specification | Detail |
Suits | Ford Next Gen Ranger RA Series May 2022 onwards | Hi-Lift Jack Points | Yes |
Compatible Grades | XL, XLS, Sport, Wildtrak, Wildtrak X, Platinum | Fog Lights | Included for applicable models |
Also Suits | Ford Next Gen Everest, Ranger PHEV | Winch Compatibility | Full, suits wide range of winch models |
Part Number | ST37FR22V1 | Recovery Points | 4 tonne rated |
Style | No loop, full bumper replacement | Finish | E-coat internal, powder coat matte black external |
Antenna Tabs | 2 | Driving Light Mounts | Yes |
Parking Sensor Compatibility | Compatible where applicable | Tech Pack Safety Features | Compatible |
ADR Compliance | Yes | Warranty | 2 years |
Tech Pack and Parking Sensor Compatibility
The ford ranger bull bar next gen owners install must not block or interfere with Ford Co-Pilot360 ADAS cameras and sensors on higher grades. The Raxar No Loop Bullbar confirms compatibility with tech pack safety features on the Next Gen Ranger and maintains factory parking sensor compatibility where applicable.
Our technicians at the Cardiff workshop confirm every tech pack camera, sensor and parking sensor operates correctly after installation. We check all systems before your Next Gen Ranger leaves our workshop.
2 Years Raxar Warranty
The ranger next gen no loop bullbar from Raxar carries a 2 years warranty covering manufacturing defects under normal use conditions. This applies to all Raxar bullbars sold through authorised Australian dealers.
Opposite Lock Cardiff is a local authorised Raxar dealer in Newcastle. We support your warranty locally after installation. Contact our Cardiff workshop on (02) 4058 1911 for any warranty queries.
Supply and Installation at Opposite Lock Cardiff Newcastle
We stock this no loop bullbar next gen ranger owners need at our Cardiff workshop on Munibung Road in Newcastle. As an authorised Raxar dealer our technicians handle the complete bull bar next gen ranger installation during a single workshop visit.
Our technicians manage fog light wiring, recovery point confirmation and tech pack sensor checks as part of every installation. We confirm everything operates correctly before your Ranger leaves our workshop.
We also carry complementary Ford Ranger accessories at our Cardiff workshop including suspension lift kits, GVM upgrades, Carryboy canopies, wheels and tyres.
FREQUENTLY ASKED QUESTIONS
What is the difference between a no loop and loop bullbar for the Ford Ranger?
Both loop and no loop bullbars suit the Ford Next Gen Ranger. A loop bullbar has a vertical tube rising above the main horizontal bar providing upper front protection and additional aerial and spotlight mounting points at height. The next gen ford ranger bull bar in no loop style has no vertical tube above the main bar. Both styles deliver the same bumper replacement protection, 4-tonne rated recovery points and winch compatibility. The no loop style suits Next Gen Ranger owners who want serious protection with a lower-profile front appearance. The loop style suits owners who want the traditional 4WD look or need additional aerial mounting height. Call us on (02) 4058 1911 and our team helps you choose.
Which Ford Next Gen Ranger grades does the Raxar no loop bull bar suit?
The Raxar next gen ford ranger no loop bull bar suits the RA Series from May 2022 onwards across all grades: XL, XLS, Sport, Wildtrak, Wildtrak X and Platinum. It also suits the Ford Next Gen Everest across all applicable grades. The bullbar also suits the Ranger PHEV though supplementary steps are required for that variant. Our team confirms correct fitment for your specific Ranger grade before any purchase or installation. Call us on (02) 4058 1911.
Is the Raxar bullbar compatible with Ford Co-Pilot360 and parking sensors?
Yes. The Raxar No Loop Bullbar confirms compatibility with tech pack safety features on the Ford Next Gen Ranger and maintains factory parking sensor compatibility where applicable. The Next Gen Ranger carries Ford Co-Pilot360 ADAS cameras and sensors on higher grades including Wildtrak, Wildtrak X and Platinum. Our technicians confirm all cameras, sensors and parking sensors operate correctly after installation. We check every system before your Next Gen Ranger leaves our Cardiff workshop.
Can I fit a winch to the Raxar no loop bullbar on my Next Gen Ranger?
Yes. The Raxar No Loop Bullbar for Next Gen Ranger includes full winch compatibility as a standard feature and suits a wide range of popular winch models. Opposite Lock Cardiff stocks and fits Runva, VRS and Warn winches at our Cardiff workshop. Our team helps you select the correct winch for your Next Gen Ranger and confirms compatibility with the Raxar bullbar before purchase. Call us on (02) 4058 1911 to discuss your winch and bullbar package.
Can you supply and fit the Raxar no loop bullbar for ford ranger next gen at your Newcastle workshop?
Yes. Opposite Lock Cardiff is a licensed and authorised Raxar dealer and installer in Newcastle. We stock next gen ranger bullbars from Raxar at our Cardiff workshop on Munibung Road and fit them during a single workshop visit. Our technicians handle the complete installation including fog light wiring and tech pack sensor confirmation. We also carry complementary Next Gen Ranger accessories including suspension lift kits, GVM upgrades, canopies, wheels and tyres. Call us on (02) 4058 1911 or get a free quote online today.
Reviews
There are no reviews yet.