Description
HSP Roll Mate BYD Shark 6 Tonneau Cover
The BYD Shark Roll Mate from HSP is a manual hard roll-up byd shark tonneau cover for the BYD Shark 6 PHEV dual-cab ute. The manual hard roll-up BYD Shark tonneau cover uses cut-proof aluminium slats, a vinyl-bonded top and a quick-release removable curtain for full tub access. Opposite Lock Cardiff is a licensed and authorised HSP dealer and installer in Newcastle, NSW.
The BYD Shark 6 is Australia’s first plug-in hybrid dual-cab ute and the tonneau cover byd shark owners choose needs to suit this new platform specifically. The HSP Roll Mate suits the BYD Shark 6 tub with a side rail width of 1188mm and an average curtain height of approximately 180mm to 225mm.
BYD Shark 6 Tonneau Cover Options - Hard vs Soft
Buyers searching for a byd shark 6 soft tonneau cover have two main options, a soft vinyl roll-up cover or a hard aluminium roll-up cover. The HSP Roll Mate is the hard roll-up option and delivers two advantages over soft covers that suit BYD Shark 6 owners who use their ute for work and outdoor use.
Cut-proof aluminium slats protect tub contents from both weather and attempted access. A soft cover cuts with a knife and provides no resistance to forced entry. The hard aluminium slat construction of the Roll Mate resists cuts, scratches and compression damage that soft vinyl covers cannot.
A hard roll-up tonneau cover byd shark owners choose also holds its shape across temperature extremes. Soft vinyl covers can sag, shrink and crack in Australian summer heat. The aluminium slat construction of the Roll Mate maintains consistent coverage regardless of temperature.
If you want a tonneau cover for byd shark use that protects against both weather and security threats, the hard Roll Mate is the correct choice.
BYD Shark HSP Roll Mate Features
The Roll Mate for BYD Shark includes the following confirmed features.
- Cut-proof Aluminium Slats: Resists cuts, scratches and forced entry
- Vinyl-bonded Top: Adds security and weather resistance to the aluminium slat surface
- Quick-release Removable Curtain: Full tub access in seconds without tools
- Slim Profile Cut Side Rails: Factory-style fit with no bulky rail profile above the tub
- Magnetic Seals, Rubber Seals and C-channels: Waterproof weather protection across the full curtain perimeter
- Heat-resistant Pads: Protects the tub surface from temperature damage
- Tie-down Straps: Secures the curtain when driving with the cover rolled up
- Factory Point or Clamp-on Installation: Suits BYD Shark 6 tub mounting options
- No Wiring: Fully manual, no electrical connection required
- ISO9001 Manufacturing Compliance: Confirmed quality standard
BYD Shark Waterproof Tonneau Cover Protection
The BYD Shark waterproof tonneau cover seal system on the Roll Mate uses three layers of weather protection working together. Magnetic seals hold the curtain edges against the side rails. Rubber seals run along the front and rear curtain edges. C-channels on the side rails direct water away from the tub interior. This three-layer system gives the Roll Mate strong weather resistance for rain, dust and debris across everyday use in Newcastle, the Hunter Valley and regional NSW. HSP note that the tub itself is not fully dustproof regardless of cover type, the Roll Mate prevents dust ingress through the cover but not through the tub itself.
Technical Specifications of BYD Shark Roll Mate
Specification | Detail |
Suits | BYD Shark 6 |
Side Rail Width | 1188mm |
Curtain Material | Aluminium with vinyl-bonded cover |
Side Rail Material | Aluminium with sheet metal mounting brackets |
Average Curtain Height | Approximately 180mm to 225mm |
Curtain Weight | Approximately 23kg |
Total Weight | Approximately 45kg |
Waterproof | Yes, magnetic seals, rubber seals and C-channels |
Dustproof | Yes, tub itself is not dustproof |
Weight Bearing | Not weight bearing. Do not place items on the cover |
Installation | Factory points or clamp-on |
Wiring | None required |
Warranty | 2 years |
Manufacturing Standard | ISO9001 compliant |
BYD Shark Roll Mate Installation
The tonneau cover byd shark 6 installation uses factory mounting points or clamp-on brackets to secure the side rails to the BYD Shark 6 tub. Minor drilling may be required depending on the mounting method chosen for your specific tub configuration. No wiring is involved at any point. The HSP BYD Shark Roll Mate is a fully manual cover with no electrical components.
Our staff at Opposite Lock Cardiff handle the complete installation at our Cardiff workshop in Newcastle. We confirm correct fitment for the BYD Shark 6 tub before installation and check all seals and curtain operation before your Shark leaves our workshop.
HSP Roll Mate BYD Shark Tonneau Cover Warranty
The HSP Roll Mate BYD Shark tonneau cover carries a 2 years warranty on the unit. HSP designs and manufactures the Roll Mate to ISO9001 quality standards with minimal moving parts. Fewer moving parts means fewer components to replace over the product’s life.
Opposite Lock Cardiff is a local authorised HSP dealer and installer in Newcastle. We support your warranty locally after installation. Contact our Cardiff workshop on (02) 4058 1911 for any warranty queries after fitting.
Roll Mate BYD Shark Tonneau Cover Supply and Installation in Newcastle
The Roll Mate BYD Shark tonneau cover is available to purchase and install at Opposite Lock Cardiff on Munibung Road in Cardiff, Newcastle. As a licensed and authorised HSP dealer in Newcastle, NSW we stock the Roll Mate for the BYD Shark 6 at our Cardiff workshop.
Opposite Lock Cardiff is one of the first local Newcastle workshops specifically stocking and fitting BYD Shark 6 aftermarket accessories. No other local Newcastle workshop offers a supply and fit service for the byd shark 6 tonneau cover with local warranty support after installation.
Call (02) 4058 1911 or get a free quote online. We are open Monday to Friday 8am to 5pm and Saturday 9am to 1pm.
FREQUENTLY ASKED QUESTIONS
Is the HSP Roll Mate a hard or soft BYD Shark 6 tonneau cover?
The HSP Roll Mate is a hard byd shark 6 tonneau cover, not a soft cover. The Roll Mate uses cut-proof aluminium slats with a vinyl-bonded top rather than soft vinyl sheeting. Hard aluminium slats resist cuts, scratches and forced entry that soft vinyl covers cannot. The aluminium construction also holds its shape in Australian heat where soft vinyl covers can sag and crack. Buyers searching for a byd shark 6 soft tonneau cover should consider the Roll Mate as the hard alternative that delivers better security and weather resistance. Call us on (02) 4058 1911 to discuss which cover option suits your BYD Shark 6 use.
Is the BYD Shark Roll Mate tonneau cover waterproof?
Yes. The BYD Shark Roll Mate uses a three-layer weather protection system (magnetic seals, rubber seals and C-channel drainage) to provide strong waterproof performance. The BYD Shark waterproof tonneau cover seal system holds the curtain edges against the rails, directs water away from the tub and protects the tub contents from rain and dust during driving. HSP note that the tub itself is not fully dustproof regardless of cover type. The Roll Mate prevents dust ingress through the cover but not through the tub itself. For installation at our Cardiff workshop in Newcastle call (02) 4058 1911.
Does the BYD Shark tonneau cover require drilling or wiring?
The byd shark tonneau cover from HSP requires no wiring at any point. It is a fully manual cover with no electrical components. Installation uses factory mounting points or clamp-on brackets on the BYD Shark 6 tub. Minor drilling may be required depending on the mounting method chosen for your specific tub configuration. Our technicians at Opposite Lock Cardiff handle the complete installation at our Cardiff workshop and confirm correct fitment for the BYD Shark 6 tub before any work starts. Call (02) 4058 1911 to book your installation.
Can I place items on the BYD Shark 6 tonneau cover?
No. The HSP Roll Mate byd shark 6 tonneau cover is not weight bearing. Do not place items on the cover or on the sports bars when the curtain is in place. The Roll Mate curtain weighs approximately 23kg and the complete unit weighs approximately 45kg. The aluminium slat construction is not designed to support additional load placed on top. Items placed on the cover risk damaging the slats, the vinyl-bonded surface and the side rail seals. For correct use guidance contact our Cardiff workshop on (02) 4058 1911.
Where can I buy and fit a tonneau cover for BYD Shark in Newcastle?
You can buy and fit a tonneau cover for byd shark at Opposite Lock Cardiff on Munibung Road in Cardiff, Newcastle. We are a licensed and authorised HSP dealer and installer and stock the Roll Mate BYD Shark tonneau cover at our Cardiff workshop. Buying locally gives you access to correct fitment confirmation, local installation and local warranty support after fitting, not available from online retailers. We are one of the first local Newcastle workshops stocking and fitting BYD Shark 6 accessories. Call us on (02) 4058 1911 or get a free quote online. We are open Monday to Friday 8am to 5pm and Saturday 9am to 1pm.
Reviews
There are no reviews yet.