Description
Check the Available Sizes, Bolt Patterns and Offsets
Choose from the following available configurations of Method 703 Bead Grip Machined Wheels. Make sure you check the wheel specifications against your vehicle before selecting an option.
- 17×8.5 | 6×139.7 | 0 Offset
- 17×8.5 | 5×127 | +25 Offset
- 17×8.5 | 6×135 | +25 Offset
Features of Method 703 Bead Grip Machined Wheels
The Method 703 Machined Wheels combine practical off-road features with a distinctive design. Here are the key features that make this wheel a suitable option for 4×4 enthusiasts.
- Patented Bead Grip® Technology: The patented Bead Grip® design helps engage the tyre bead at lower inflation pressures.
- Solid A356 Aluminium Construction: Method Race Wheels uses solid A356 aluminium to build the 703 wheels.
- T6 Heat Treatment: The T6 heat treatment adds strength to the aluminium construction. It helps the Method 703 wheels handle the demands of regular driving and off-road conditions.
- Iconic 12-Window Design: The 12-window design gives these Method Race Wheels a distinctive appearance. It adds a bold look to your 4×4 while maintaining the recognisable Method styling.
- Dual Debossed METHOD Logos: The debossed METHOD logos add detail to the wheel design. They also make the 703 range easy to recognise.
- Aggressive Safety Hump: The aggressive safety hump on the bead seat provides additional support for tyre retention. It helps reduce the risk of the tyre debeading when running lower pressures.
- Reinforced Inner Lip: Method Race Wheels uses a reinforced inner lip design taken from its MRW race wheels. This feature adds strength to the wheel structure.
- Snap-In Centre Cap: The wheel comes with a snap-in centre cap featuring an embossed METHOD Bead Grip® logo. It gives the finished wheel a clean and branded appearance.
- Push-Through Centre Cap for 8-Lug Application: Selected 8-lug applications use a push-through centre cap. It features the embossed METHOD Bead Grip® logo and suits the relevant wheel configuration.
- Hub-Centric Fitments: The Method 703 range offers hub-centric fitments for common vehicle applications. Correct hub compatibility helps ensure the wheel fits the vehicle properly.
- High Load Ratings: The Method 703 range offers load ratings of up to 1,651 kg, with another listed rating of 1,202 kg.
Specifications
| Details | Description |
|---|---|
| Finish | Machined |
| Wheel Sizes | 17×8.5 |
| Bolt Patterns | 6×139.7, 5×127, 6×135 |
| Offset Options | 0, +25 |
| Construction | Solid A356 Aluminium |
| Heat Treatment | T6 |
| Design | 12-window |
| Bead Technology | Patented Bead Grip® |
| Load Ratings | 1,202 kg and 1,651 kg |
FREQUENTLY ASKED QUESTIONS
What sizes are available for Method 703 Bead Grip Machined Wheels?
The Method 703 Bead Grip Machined Wheels are listed in 17×8.5-inch sizing, with three available configurations:
- 6×139.7 stud pattern with 0 offset
- 5×127 stud pattern with +25 offset
- 6×135 stud pattern with +25 offset
Check the selected configuration against your vehicle before purchasing.
Are Method 703 Bead Grip Machined Wheels suitable for off-road driving?
Yes. The Method 703 features Bead Grip® technology, an aggressive safety hump and a reinforced inner lip. These features are designed to support off-road applications, including suitable driving conditions where reduced tyre pressures are used.
Do Method 703 Bead Grip Machined Wheels come with centre caps?
Yes. The Method 703 wheels feature a snap-in centre cap with an embossed METHOD Bead Grip® logo. Selected 8-lug applications use a push-through centre cap instead.
What vehicles are compatible with Method 703 Bead Grip Machined Wheels?
The Method 703 is available with 6×139.7, 5×127 and 6×135 stud patterns. However, compatibility depends on more than the stud pattern. You should also check the wheel offset, centre bore, brake clearance, suspension clearance and vehicle load requirements before installation.







Reviews
There are no reviews yet.